It may seem strange, however, many people don’t know how to correctly use a paint tray! Commonly, they pour a portion of the paint into the tray and begin using a paint roller. They begin rolling the roller throughout and begin their paint job. It is crucial to understand how the paint tray functions as a tool for the best success. Learn if you are using all of your costly paint items appropriately by checking out the following guidelines. You may end up learning newer techniques that will conserve copious amounts of money and time.



Utilize the most effective equipment to secure professional results. As with most projects, obtaining the right tools for the job ensures a better end result. It can be tempting to try and save cash with lower quality items; however, we advise avoiding them altogether. Higher quality trays and paint rollers really are a worthy investment, even if they cost more. Expert paint products are worth the investment because they can precisely influence your result. You will be able to reuse most products numerous times if you comply with proper clean-up protocols.

Thoroughly mix the paint. Try and get your paint mixed via a paint mixer machine by a specialist from the painting department at the store when you obtain it. Freshly purchased and tinted paint will likely be mixed for you upon purchase usually. It is best to use the paint as soon as possible once it has been mixed. Oftentimes, it is tough to tell how well your paint is actually mixed so work with a stir stick and slowly mix. Mix effectively from the bottom part of the can make certain there is no paint separation transpiring before you apply. Pour approximately a third of the paint right into the deep portion of your paint tray after it is all mixed.

Envelop the total roller thoroughly. Lots of people casually dip their paint roller; however, it is vital to cover the entire roller. Accidentally solely coating one side of the roller or believing the paint will carry itself and saturate the other side are typical mistakes. Roll the paint roller carefully to prevent spilling paint over the outside of the tray. Work with a tarp, newspaper, or a drop cloth to carefully shield your floor from your paint roller.

"Drying" the particular paint roller. As soon as your paint roller is thoroughly soaked with paint, it needs some time to rest or dry. This is what the bucket screen or shallow division of your paint tray is for. Use the bumps on the shallow end of your screen or paint tray to roll the roller and take off the excess paint. Once this step is done, it is possible to transfer the paint roller to the wall and start!

Launch your paint party! Start painting your walls roughly 1-foot from the lower corner of your wall. Use a “W” sequence and come up and over the wall. Rely on steps 3 and 4 for refilling your paint roller and topping up your paint tray until you are finished.



Correctly clean up your paint tools when finished. Make certain you clean up after the day or once the painting is complete to maintain your tools correctly. Caring for your paint equipment will help you reuse your items a number of times. Should you lack storage or are not going to paint again soon, consider reselling your paint equipment. Oil-based and latex paint require distinct cleanup methods. Oil-based relies upon solvents and latex calls for water.

Discovering how to safeguard your tools will deliver the best results and maximize your resale and storage options. Save the planet plus your time and money by taking care of your paint tools instead of repurchasing them. Renovations are costly. By effectively caring for your paint supplies, you can recycle them for decades and help save the environment.