Asking different people about applying primer before painting will yield a host of various answers. Primer helps you attain excellent painting results by filling small blemishes on the wall and preparing a smooth surface. Many paint manufacturers advise that you spray, brush or roll two primer layers.



Pay attention to paint technicians quoting an hourly rate that recommend primer compared to contractors who bill by the job and would like to skip the step. The condition of your walls will determine if, in fact, you need to use primer or not. If the walls are already recently painted, this may suffice. On the other hand, if you are painting on top of a truly dark shade, you have got to prime ahead of time.

It may be tempting to cite cost and time and forget about primer altogether. It may feel like the priming step is really a waste. If the wall has surface stains or remaining water stains, priming is essential. Check around the window seal plus the roof to see if there are any signs of water damage. Priming hides flaws and results in a surface ready for paint adhesion. It is an fundamental step.Priming may help the paint adhere properly and hiding any slight imperfections.

Reasons For Priming Before Painting

Primer functions by prepping the surface and creating stability so the paint can adhere to the wall. Primer conceals stains on the surface and seals dark paint colors. Less paint is required when the primer achieves the coverup..

Makes the Surface Base Stable

How porous the wall condition is can influence the use of primer. If the surface is extremely porous, too much paint will collect. A variety of paint coats will be necessary to create a uniform finish. Less paint will likely be required if you apply a primer to close the wall first.

Adhesion can be difficult with color paints if the wall is way too glossy and smooth. The primer creates a rough and porous texture to allow for optimum paint adhesion.

Hide Stains

Old stains could very well bleed through your paint. When you seal off the wall with a primer, you don’t have to worry about this. Allow your color coat to shine and look it’s absolute best by decreasing any stain issues.

Ordinarily, primer costs less compared to paint. Save money by creating your base with primer instead of copious amounts of paint.

Priming the area first can add years to your wall and your paint job. When you have applied primer, you can better determine your wall condition.

Do You Have to Prime Before Painting?

There are many reasons why paint primer benefits your wall surface and improves your end result. Filling a porous surface is one of the most common reasons for using a primer. Many distinctive surfaces are permeable. Create an even painting surface simply using a primer before painting.



Freshly Installed Drywall

Completely new drywall is highly porous. The bare-facing paper and the joint compound over the seams are extremely porous. Work with less paint overall by choosing to prime your walls first.

Prime your drywall first to use far less paint.

Natural Wood

Bare lumber is also thirsty and porous. Save yourself plenty of paint using a suitable primer first.

Bare wood is additionally parched and permeable. Save yourself tons of paint by using a suitable primer first.

Masonry bricks are highly porous. Invest in a heat-recommended primer to seal your fireplace if you'll be painting.

Skim-Coated Drywall

Wiping a thin coat of drywall compound over bare drywall is referred to as a skim coat. Known as a “level five finish,” this is the highest level grade. The drywall skim coat resembles bare wood and drywall in its porousness and requires one primer coat minimum before paint is applied.

When the Prior Coat Is Glossy

It is important to scuff up any object that you are repainting if it includes a glossy finish. Lightly rub it with some sandpaper to rough it up. Next, apply one or two primer coats to ensure your topcoat goes on perfectly. If you miss the scuffing step, using a primer can still help to prepare your item to hold paint far better. Using steel wool or sandpaper on glossy plastics or paint before painting will generate texture and allow better paint adhesion.

Changing Colour From Dark to Light

If the root color is black or extremely dark, paint two priming white layers first. This will help you avoid the issue of dark colours bleeding through numerous coats of light colours. Your primer can even be tinted. In the event you are transitioning from a light color to a dark color, you could opt to tint your primer. This can help you require fewer coats all in all.

This can lessen the number of coats you require.

Water-stained or spotted locations immensely benefit from a primer. A product such as Kilz is great for sealing mildew or mold and creating a barrier. Priming properly prepares the surface to handle paint and produce a professional finish. While it might be tempting to bypass primer, the result will be drastically different.